Step 2: Connect all HDDs then do below settings: Set [SATA Mode] as [RAID Mode] Change [Onboard RAID 3TB Unlocker] to [EFI Compatible ROM] The options are located in BIOS [Storage Configuration] Then press F10 to save settings.Step 3: Press F11 during boot up and choose boot to [Built-in EFI Shell].Gaming: https:// X399 Professional Gaming/index.asp#BIOS Step 2. Answer: If your motherboard has two PS2 ports, just connect the PS2 mouse to the green PS2 port, and then the PS2 mouse can be used. Only supported for SATA-based boot drive Answer: Z270, H270 and B250 platform can support Intel Optane memory since BIOS P2.00 version. Put a 4K movie BD disc into the Pioneer Ultra HD Blu-ray drive. Press "F10” to save and exit the BIOS setup screen. Download link: https:// Since AMD AM4 is a new structure and we just found BIOS cannot be completely updated by our Instant Flash.
Install the 24 pin power connector to the motherboard. Choose Z270, H270 or B250 series platform and 7th Generation (Kaby Lake) Intel® Core™ Processor. However, if the active BIOS_A1 is corrupted or damaged, after several failed boot attempts, it will automatically do BIOS recovery from the backup BIOS_B1 and then the system will still work on the active BIOS_A1. If your model isn't listed in the table, please visit the beta zone of your model and then update the latest beta BIOS. Question (Q&A-116|391): If I install two monitors (DVI and D-sub) on FM2A88X Extreme6 and boot up the system, the system will freeze during Windows 8.1 booting process. For more suggestions about 3Dmark, please refer to 3Dmark FAQ: Answer: Step 1: Please make sure that you have installed the latest BIOS and two 1866MHz or higher frequency memory modules in dual channel.
Answer: Please update the latest BIOS from ASRock official website firstly. cat=BIOS Because of AM4 memory compatibility issue, some high frequency memory modules may not work with XMP profile successfully.
Go to This PC → Right click on the mouse → Select Properties → File system Step 3. Please press "F2” or "Del” during POST to enter BIOS, select the "Advanced” menu, "Super IO Configuration”, and set the "PS2 Y-cable” option to "Enabled”. Please press "F2” or "Del” during POST to enter BIOS setup, select the "Advanced” menu and enter the "Chipset Configuration” page, and adjust the "Deep Sleep” option to "Enabled in S5”. Please connect the HDMI cable to HDMI2 port of Z170 Gaming-ITX/ac. When the system boots up, press "F2” to enter UEFI setup screen. To make sure BIOS update can be executed completely, please use DOS or Windows BIOS update methods to do update temporarily.
If the USB drive is not FAT32 format, please create an USB flash with FAT32 format. Wait until the LED stops blinking, indicating that BIOS flashing has been completed. After adjusting the setting, press "F10” to save the configuration. Go to Advanced CPU Configuration and enable "Software Guard Extensions” in BIOS setting. After updating to the following version, Instant Flash functions and options are supported under BIOS and it can be used for updating the newer BIOS file in the future. Please load the BIOS default settings and then save the settings. Enter into BIOS setup and choose "Instant Flash" to upgrade to the latest BIOS Step 5.
Step11: Choose [Ld Size setting], and key in the Raid size.