You reach this from the Playback tab and it has a calendar on the right to select a date.
Here’s an inside look at the camera, you can see the extra pigtail here for the alarm input as well as the 2 way audio wires.
To get to the zoom and focus wands, remove the black plastic cover and tilt the lens down and the wands are in the back, easy to reach and adjust.
I’ll go over some of the setup screens of interest.
After setting the IP address in SADP, you can change it again under Network, but since that’s done, the next step may be configuring the ports if you want to access the cameras from the internet.
Under Advanced Configuration / System are where you can set the Time Settings, in my case, I used the old standby Windows NTP server to keep all my cameras time synced the same way.